12-13-2012 11:40 AM - edited 03-07-2019 10:35 AM
Is there a command to globally invoke rw or ro feature of SNMP on a 356024P switch?
12-13-2012 12:37 PM
Hi,
Have a look at the Snmp section here :-
Regards,
Alex.
Please rate useful posts.
12-13-2012 12:47 PM
You can enable snmp with:
snmp-server community
You can tie it down with an access-list as well if you were only interested in letting a single subnet get access to it:
access-list 62 permit 192.168.1.0 0.0.0.255
snmp-server community
The
You can replace RO with RW for read/write...
HTH,
John
*** Please rate all useful posts ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide