fcoe on the F2 module

[dhalevi]

hi,

It seems there are two conflicting pieces of information about support for FCoE on the F2 module for the Nexus 7k.

This document says that the F2 module does support FCoE.

http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/data_sheet_c78-685394.html

The module protects investments with standards-based 10 Gigabit Ethernet, Fibre Channel over Ethernet (FCoE) features, and virtual machine-awareness features that allow IT departments to consolidate networks based on their own unique requirements and timing. Each port can also be used at 1 Gigabit Ethernet speed, allowing IT departments to migrate to 10 Gigabit Ethernet based on the specific needs of their networks.

This document says that FCoE is not supported on the F2 module.

http://www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/release/notes/60_nx-os_release_note.html

Some software features are not available on the F2-Series module in Cisco NX-OS Release 6.0. These include ACL Capture, ERSPAN, FCoE, GRE tunnels, LISP, MACSEC, MPLS, Netflow, online diagnostics, OTV, PIM-BiDir, and certain counters. Many of these features will be supported in future software releases; however, the F2-Series hardware does not support LISP, MPLS, and OTV, GRE tunnels, and PIM-BiDir so these features will remain unavailable on the F2-Series module.

Do we know when the F2-Series module will support FCoE?

thanks!