01-18-2022 02:18 AM
hi all,
so i know on the switch, to find a mac you do this
show mac address-table address mac:addr:here
and it will show you the port, but can you do this via the ip address instead, ie find the port via the ip instead
thanks,
rob
01-18-2022 02:22 AM
Yes, with IP Device Tracking.
01-18-2022 02:33 AM
i see theres configuration to do before you can do this, unlike the show mac address comamnd
if i enable it, will it consume resources up, as i read it sends a beacon out every 10 seconds?
01-18-2022 02:44 AM
Depends on the platform and the IOS/IOS-XE version.
01-18-2022 03:10 AM
there SG300 switches
01-18-2022 03:31 AM
Unfortunately, I am not familiar with SG platform.
I know, IP Device Tracking is supported in IOS and IOS-XE.
01-18-2022 05:23 AM
isnt it this as seems to work
show arp ip-address x.x.x.x
01-18-2022 07:08 AM
show arp ip-address x.x.x.x
yes that works, is this what you looking to find ? but OP was different though.
01-18-2022 05:12 AM
SG300 switches
not that i am aware this model support what you looking.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide