10-17-2006 03:00 AM - edited 03-05-2019 12:17 PM
Hi All,
We have two routers configured with HSRP and support NAT static mapping. We would like to change HSRP to GLBP. But I can't find any information regarding NAT static mapping support with GLBP. Is it possible to retain the "redundancy HSRP" if GLBP is used? Below is portion of configuration for your reference. (ip addresses are changed)
[Router A]
interface FastEthernet0/0
ip address 192.168.1.2 255.255.255.0
ip nat inside
standby 1 ip 192.168.1.1
standby 1 priority 110
standby 1 name HSRP
!
interface Serial0/0
ip address 172.16.1.1 255.255.255.252
ip nat outside
!
...
!
ip nat inside source static 10.3.2.20 192.168.1.20 redundancy HSRP
...
[Router B]
interface FastEthernet0/0
ip address 192.168.1.3 255.255.255.0
ip nat inside
standby 1 ip 192.168.1.1
standby 1 priority 100
standby 1 name HSRP
!
interface Serial0/0
ip address 172.16.2.1 255.255.255.252
ip nat outside
!
...
!
ip nat inside source static 10.3.2.20 192.168.1.20 redundancy HSRP
...
Regards and Thanks,
Anthony
03-17-2008 04:35 PM
Hello Anthony I just make work GLBP with SNAT
so yes it is posible, drop me an email if you still interested.. I can send to you examples is tricky but it work..
04-30-2016 02:55 PM
Hi RaulMorales,
How did you successfully make SNAT work with GLBP. Kindy send me sample of your configuration to udensionline@yahoo.com
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide