12-27-2021 03:40 AM - edited 12-27-2021 03:46 AM
Object network A
Subnet 192.168.1.0 255.255.255.0
Object network B
Subnet 172.31.1.0 255.255.255.0
Object network C
The host 172.32.1.10
Nat (internal, external) Source AA Target network BC
I would like help to convert to NAT command version 8.3. thank you
Solved! Go to Solution.
12-28-2021 12:47 AM
Hello,
I don't have a pre 8.3 to test this on, but the config should look something like below:
static (inside) 1 192.168.1.0 255.255.255.0
global (outside) 1 172.31.1.0 255.255.255.0
!
static (inside) 2 192.168.1.0 255.255.255.0
global (outside) 2 172.32.1.10
12-27-2021 04:22 AM
Hello,
--> Source AA Target network BC
What do you mean by that. Is AA a host in the A network ? What is BC ? Both networks B and C ?
Below a link to all pre 8.3 MAT configs:
12-28-2021 12:13 AM
Object network A1
Subnet 192.168.1.0 255.255.255.0
Object network B
Subnet 172.31.1.0 255.255.255.0
Object network C
The host 172.32.1.10
Nat (inside, outside) source static A1 A1 destination static B C no-proxy-arp
I would like help to convert to NAT command version 8.3. thank you
12-28-2021 12:47 AM
Hello,
I don't have a pre 8.3 to test this on, but the config should look something like below:
static (inside) 1 192.168.1.0 255.255.255.0
global (outside) 1 172.31.1.0 255.255.255.0
!
static (inside) 2 192.168.1.0 255.255.255.0
global (outside) 2 172.32.1.10
12-28-2021 05:49 PM
Hi
Thank you for your help, but it is not running
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide