Go back to the old version of NAT command

[Mali1]

Object network A
Subnet 192.168.1.0 255.255.255.0
Object network B
Subnet 172.31.1.0 255.255.255.0
Object network C
The host 172.32.1.10
Nat (internal, external) Source AA Target network BC
I would like help to convert to NAT command version 8.3. thank you

[Georg Pauwen]

Hello,

--> Source AA Target network BC

What do you mean by that. Is AA a host in the A network ? What is BC ? Both networks B and C ?

Below a link to all pre 8.3 MAT configs:

https://community.cisco.com/t5/security-documents/asa-pre-8-3-to-8-3-nat-configuration-examples/ta-p/3116375

[Mali1]

Object network A1
Subnet 192.168.1.0 255.255.255.0
Object network B
Subnet 172.31.1.0 255.255.255.0
Object network C
The host 172.32.1.10
Nat (inside, outside) source static A1 A1 destination static B C no-proxy-arp

I would like help to convert to NAT command version 8.3. thank you

[Georg Pauwen · Accepted solution]

Hello,

I don't have a pre 8.3 to test this on, but the config should look something like below:

static (inside) 1 192.168.1.0 255.255.255.0
global (outside) 1 172.31.1.0 255.255.255.0
!
static (inside) 2 192.168.1.0 255.255.255.0
global (outside) 2 172.32.1.10

[Mali1]

Hi

Thank you for your help, but it is not running