Help about 300 serie switches

[rdrisaldi]

I have to use 9 Cisco 300 serie switches to build a new network. I will use one of them (core switch) in L3 for routing between Vlans (3 Vlans) and the others in L2. Is there a software to centralized all switches configuration, operation and monitoring? Thanks in advance for your help.

[acampbell · Accepted solution]

Hi

No -- these switches are not stacked, therfore they all have there own firmware/software & config individually

This link will be helpful to you as this is the 300 switch page

http://www.cisco.com/en/US/products/ps10898/tsd_products_support_series_home.html

The install pdf is

http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/quick_start/78-19252-01.pdf

The config pdf

http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/administration_guide/78-19308-01.pdf

They configure either from a browser or good old IOS type commands

HTH

Alex

Please rate useful posts