02-20-2012 04:05 PM - edited 03-07-2019 05:03 AM
I have to use 9 Cisco 300 serie switches to build a new network. I will use one of them (core switch) in L3 for routing between Vlans (3 Vlans) and the others in L2. Is there a software to centralized all switches configuration, operation and monitoring? Thanks in advance for your help.
Solved! Go to Solution.
02-20-2012 05:12 PM
Hi
No -- these switches are not stacked, therfore they all have there own firmware/software & config individually
This link will be helpful to you as this is the 300 switch page
http://www.cisco.com/en/US/products/ps10898/tsd_products_support_series_home.html
The install pdf is
http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/quick_start/78-19252-01.pdf
The config pdf
http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/administration_guide/78-19308-01.pdf
They configure either from a browser or good old IOS type commands
HTH
Alex
Please rate useful posts
02-20-2012 05:12 PM
Hi
No -- these switches are not stacked, therfore they all have there own firmware/software & config individually
This link will be helpful to you as this is the 300 switch page
http://www.cisco.com/en/US/products/ps10898/tsd_products_support_series_home.html
The install pdf is
http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/quick_start/78-19252-01.pdf
The config pdf
http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/administration_guide/78-19308-01.pdf
They configure either from a browser or good old IOS type commands
HTH
Alex
Please rate useful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide