HELP PLEASE!!!!!!!!!!!!!!!!!!

[williamadams52100688]

I have a lab Configuring a switch in VTP transparent mode and i cant for the life of me get the two routers to be able to ping each other see attached

[Francesco Molino · Accepted solution]

Hi

I'm sorry can't get packet tracer working on my mac. Can you share the design and configs?

[williamadams52100688]

I attached a package tracer zip file

[Francesco Molino]

Yes but not able to run packet tracer on my machine. That's why i asked if you could share the config and design to help you.

[williamadams52100688]

Attached are the steps I went through, I will send my setup in a few minutes

[Francesco Molino]

Don't see nothing attached

[williamadams52100688]

I think I figured it out, I didn't have the trunk configured, configured it
and then I could ping.

##- Please type your reply above this line -#

[Francesco Molino]

Ok thanks for letting us know

[Georg Pauwen]

Hello,

the below would work as well (making access ports in Vlan 2010 of all links):

SW1

interface FastEthernet0/1
switchport access vlan 2010
switchport mode access
!
interface FastEthernet0/2
switchport access vlan 2010
switchport mode access

SW2

interface FastEthernet0/1
switchport access vlan 2010
switchport mode access
!
interface FastEthernet0/2
switchport access vlan 2010
switchport mode access