05-24-2007 12:36 PM - edited 03-05-2019 04:17 PM
hi,
I am experiencing high CPU utilzation in C3548-XL-EN .Upgradation of RAM or Flash in switch can help me solve this ?
regards
Neo
05-24-2007 01:54 PM
You need to specify a lot more than that , what are you seeing . Under no load at all these switches will run 30-40 % , which is normal . Do a search on the cisco main page for high cpu and 3548 and read the doc .
05-24-2007 01:58 PM
Hi Glen,
Kindly let me know if its possible to upgrade RAM or Flash in C3548-XL-EN ?
I am getting CPU utilization of about 60% at peak load .
regards
Neo
05-24-2007 03:36 PM
Hello Neo,
I guess this is normal, unless & until the switch behaves strange, like dropping packets or application issues :) please look into the document attached with this post. might be of help. if not , get us the show proc cpu output, if there are any critical issues.
Hope this helps.. all the best. rate replies if found useful.
Raj
05-24-2007 05:35 PM
No its not possible , these switches are way past end of life and are not supported any more by cisco. Your only option would be to upgrade to the last code version that cisco ever put out for this model. This was the last version c3500xl-c3h2s-mz.120-5.WC17.bin .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide