12-06-2007 05:28 AM - edited 03-05-2019 07:51 PM
Hello All, I am getting a 90% (at times 100%) on my 6509 switch. What could be the problem?
12-06-2007 06:46 AM
12-06-2007 06:49 AM
Most likely spanning-tree, but you can do a
"sh proc cpu | excl 0.00% 0.00% 0.00%"
to see which processes are driving the CPU.
12-08-2007 11:38 PM
Hi,
Most likely STP problem, routing loop, DDOS.
Post "show process CPU" "show process MEM" and also "show version"
Regards,
Dandy
12-09-2007 02:15 AM
Hi
Could be a number of things. Have a look at this document and see if it gives you an ideas.
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a00804916e0.shtml
HTH
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide