cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1274
Views
0
Helpful
4
Replies

How can you tell this interface is a static MAC address?

macky1313
Beginner
Beginner

Switch1#show mac-address-table

Dynamic Address Count:                 19
Secure Address Count:                  0
Static Address (User-defined) Count:   0
System Self Address Count:             41
Total MAC addresses:                   50
Non-static Address Table:
Destination Address  Address Type  VLAN  Destination Port
-------------------  ------------  ----  --------------------

0010.0de0.e289               Dynamic              1          FastEthernet0/1

0010.7b00.1540              Dynamic              2          FastEthernet0/5

0010.7b00.1545              Dynamic              2          FastEthernet0/5

0060.5cf4.0076               Dynamic              1          FastEthernet0/1

0060.5cf4.0077               Dynamic              3          FastEthernet0/1

Switch1#show cdp neighbors

Capability Codes:

R - Router, T - Trans Bridge, B - Source Route Bridge 
            S - Switch, H - Host, I - IGMP, r - Repeater 
 
 
Device ID Local Intrfce Holdtme Capability Platform Port ID 
Switch2          Fas 0/1     157             s              2950-12  Fas 0/1 
Switch3          Fas 0/2     143             s              2950-12  Fas 0/5 

As you can see above, how do we know Fastethernet 0/5 has statically assigned MAC address?

4 Replies 4

Ko Is
Beginner
Beginner

Hi,

It seems that there is no address static from the command of "show mac-address-table".
If it is original, "Static Address (User-defined) Count:" will increase.

Thanks for the reply.

According to this question:

A. A hub is connected directly to FastEthernet 0/5

B. FastEthernet0/1 is connected to a host with multiple network interface cards.

C. Interface FastEthernet 0/2 has been disabled.

D. Multiple devices are connected directly to FastEthernet0/1.

E. FastEthernet0/1 is configured as a trunk link.

F: Fast Ethernet0/5 has statically assigned MAC addresses.

My answer: A E.

Correct answer is E F

Do you think the answer suggested is wrong?

"0010.7b00" -- since this is the MAC Address of Cisco, it is considered to be also Static.
Therefore, aren't E and F considered, either?

Is this a fact that ""0010.7b00" is a static MAC address of Cisco?

Are there are any other static MAC address for Cisco routers or switch?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers