08-09-2010 04:37 PM - edited 03-06-2019 12:23 PM
aside from doing in-line taps, i'm curious to see what people are doing to get around 2 session limit. I have need to monitor multiple source vlans and it's over-subscribing the destination port. also using vlan and physical interfaces as a source in a single session is not allowed so i use the 2nd session for physical interfaces.... i only have 2 session to play with..what are some are the other workaround etc.
TIA
08-09-2010 05:08 PM
Hi Andy,
If its 6500 you can use VACL captures. There is no workaround that I know of if its any other plaforms.
JayaKrishna
08-09-2010 05:14 PM
Thanks
JayaKrishna..yes this is on a 6509...also anyone using RSPAN etc to get more sessions..i'd be interested in design alternatives...thanks
08-09-2010 08:46 PM
I'm pretty sure RSPAN uses up one of your sessions so it isn't a great alternative, but depending upon the scenario the VACL is a really good alternative.
http://www.cisco.com/en/US/tech/tk389/tk814/technologies_configuration_example09186a00808122ac.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide