How to check CDP Neighbor UPTIME

[ALI12]

Hello Team,

Does there's anyway to check CDP Neighbor Uptime on :cisco WS-C6506-E

Thanks in Advance 

[Max Jobs]

Hi buddy,

Don't hesitate to use this command:

show cdp neighbor detail

[ALI12]

Thanks @Max Jobs for your reply,

I used it but not showing the neighbor UpTime 

[MHM Cisco World]

Cdp uptime ? Can you more elaborate.

Uptime of neighbor through cdp?

MHM

[ALI12]

yes @MHM Cisco World 

that's what I mean , 

Uptime of neighbor through cdp

[MHM Cisco World]

Let me check cdp tlv' if there is way to send uptime as cdp tlv.

Update you today 

Thanks 

MHM

[Torbjørn]

I have not seen this as a configurable TLV anywhere before. Please do correct me if I am wrong.

See the following documentation: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cdp/configuration/15-mt/cdp-15-mt-book/nm-cdp-secure-cdp.html

[MHM Cisco World]

version <<- since we can know uptime by show version then I was thinking using TLV version to get some info from CDP 
unfortunately in me lab I can not use this TLV 
@ALI12 try if you can use tlv version

if not work then there is no other way

show cdp neighbor detail

in end there is IP device use as mgmt IP use it to access and do show version 

thanks 

MHM 

[Max Jobs]

ALI, If you mean timmer or holdtime, here is some commands:

DescriptionCommand

Configure CDP Timer	HQ_Router(config)# cdp timer 100
Configure CDP Holdtime	HQ_Router(config)# cdp holdtime 200

DescriptionCommand

Enter privileged EXEC mode (Enter your password if prompted)	HQ_Router>enable
Display information about neighboring devices	HQ_Router#show cdp neighbors
Display detailed information about neighboring devices	HQ_Router#show cdp neighbors detail
Display detailed information about neighboring devices	HQ_Router# show cdp entry *
Display IP addresses of each directly connected neighbor	HQ_Router#show cdp entry * protocols
Display IOS version of each directly connected neighbor	HQ_Router# show cdp entry * version

[ALI12]

I mean Uptime of neighbor through cdp , 

I think as @Torbjørn reply,  there's no way to see the uptime of a neighboring device

However , thank you @Max Jobs for your reply 

[Torbjørn]

There is unfortunately no way to see the uptime of a neighboring device from CDP directly. That data is simply not included in the CDP frames. You can find the neighbor management IP address with "show cdp neighbor" and log into the device to check uptime with "show version",

[ALI12]

Thanks @Torbjørn for this info