10-11-2011 06:33 AM - edited 03-07-2019 02:43 AM
I believe my Chassis fan tray might be going bad in my 6509 and I am wondering on how to check the status? Thanks
Solved! Go to Solution.
10-11-2011 06:54 AM
Hi,
Use the show environment command.
Sent from Cisco Technical Support iPhone App
10-11-2011 06:54 AM
Hi,
Use the show environment command.
Sent from Cisco Technical Support iPhone App
10-11-2011 07:25 AM
Thanks, strange, My NMS was showing Fan-tray 1 as "failed" but here it appears to be good. I assume
"fan-tray 1 fan-fail: OK" means its alright.
6509#show environment
environmental alarms:
no alarms
backplane:
operating clock count: 2
operating VTT count: 3
fan-tray 1:
fan-tray 1 type: WS-C6K-9SLOT-FAN2
fan-tray 1 version: 2
fan-tray 1 fan-fail: OK
VTT 1:
VTT 1 OK: OK
VTT 1 outlet temperature: 27C
VTT 2:
VTT 2 OK: OK
VTT 2 outlet temperature: 25C
VTT 3:
VTT 3 OK: OK
VTT 3 outlet temperature: 30C
clock 1:
clock 1 OK: OK, clock 1 clock-inuse: in-use
clock 2:
clock 2 OK: OK, clock 2 clock-inuse: not-in-use
power-supply 1:
power-supply 1 fan-fail: OK
power-supply 1 power-input: AC high
power-supply 1 power-output-mode: high
power-supply 1 power-output-fail: OK
power-supply 2:
power-supply 2 fan-fail: OK
power-supply 2 power-input: AC high
power-supply 2 power-output-mode: high
power-supply 2 power-output-fail: OK
module 1:
module 1 power-output-fail: OK
module 1 outlet temperature: 35C
module 1 inlet temperature: 23C
module 2:
module 2 power-output-fail: OK
module 2 outlet temperature: 47C
module 2 inlet temperature: 24C
module 3:
module 3 power-output-fail: OK
module 3 outlet temperature: 45C
module 3 inlet temperature: 25C
module 4:
module 4 power-output-fail: OK
module 4 outlet temperature: 25C
module 4 inlet temperature: 24C
module 4 device-1 temperature: 22C
module 4 device-2 temperature: 28C
module 5:
module 5 power-output-fail: OK
module 5 outlet temperature: 29C
module 5 inlet temperature: 23C
module 5 device-1 temperature: 34C
module 5 device-2 temperature: 34C
module 5 asic-1 (SSO-1) temp: 23C
module 5 asic-2 (SSO-2) temp: 23C
module 5 asic-3 (SSO-3) temp: 23C
module 5 asic-4 (SSO-4) temp: 23C
module 5 asic-5 (SSA-1) temp: 23C
module 5 asic-6 (HYPERION-1) temp: 23C
module 5 RP outlet temperature: 27C
module 5 RP inlet temperature: 27C
module 5 EARL outlet temperature: 37C
module 5 EARL inlet temperature: 23C
module 6:
module 6 power-output-fail: OK
module 6 outlet temperature: 29C
module 6 inlet temperature: 22C
module 6 device-1 temperature: 34C
module 6 device-2 temperature: 34C
module 6 asic-1 (SSO-1) temp: 23C
module 6 asic-2 (SSO-2) temp: 23C
module 6 asic-3 (SSO-3) temp: 22C
module 6 asic-4 (SSO-4) temp: 22C
module 6 asic-5 (SSA-1) temp: 23C
module 6 asic-6 (HYPERION-1) temp: 23C
module 6 RP outlet temperature: 28C
module 6 RP inlet temperature: 28C
module 6 EARL outlet temperature: 36C
module 6 EARL inlet temperature: 23C
module 7:
module 7 power-output-fail: OK
module 7 outlet temperature: 44C
module 7 inlet temperature: 21C
module 8:
module 8 power-output-fail: OK
module 8 outlet temperature: 44C
module 8 inlet temperature: 23C
chassis connector rating: 1260.00 Watts (30.00 Amps @ 42V)
module 1
module 1 connector rating: 1260.00 Watts (30.00 Amps @ 42V)
module 1 power consumption: 152.04 Watts ( 3.62 Amps @ 42V)
module 2
module 2 connector rating: 2016.00 Watts (48.00 Amps @ 42V)
module 2 power consumption: 277.62 Watts ( 6.61 Amps @ 42V)
module 3
module 3 connector rating: 2016.00 Watts (48.00 Amps @ 42V)
module 3 power consumption: 325.50 Watts ( 7.75 Amps @ 42V)
module 4
module 4 connector rating: 2016.00 Watts (48.00 Amps @ 42V)
module 4 power consumption: 125.16 Watts ( 2.98 Amps @ 42V)
module 5
module 5 connector rating: 1260.00 Watts (30.00 Amps @ 42V)
module 5 power consumption: 315.00 Watts ( 7.50 Amps @ 42V)
module 6
module 6 connector rating: 1260.00 Watts (30.00 Amps @ 42V)
module 6 power consumption: 315.00 Watts ( 7.50 Amps @ 42V)
module 7
module 7 connector rating: 2016.00 Watts (48.00 Amps @ 42V)
module 7 power consumption: 325.50 Watts ( 7.75 Amps @ 42V)
module 8
module 8 connector rating: 2016.00 Watts (48.00 Amps @ 42V)
module 8 power consumption: 325.50 Watts ( 7.75 Amps @ 42V)
chassis per slot cooling capacity: 70 cfm
ambient temperature: < 55C
module 1 cooling requirement: 30 cfm
module 2 cooling requirement: 70 cfm
module 3 cooling requirement: 70 cfm
module 4 cooling requirement: 70 cfm
module 5 cooling requirement: 35 cfm
module 6 cooling requirement: 35 cfm
module 7 cooling requirement: 70 cfm
02-27-2014 09:28 AM
Did you find out why this was, I see the same thing CLi shows it as fine, but an SNMP walk...
ciscoEnvMonFanStatusDescr.101 | chassis-1 Chassis Fan Tray 1 |
ciscoEnvMonFanStatusDescr.102 | chassis-1 Power Supply 1 Fan |
ciscoEnvMonFanStatusDescr.103 | chassis-1 Power Supply 2 Fan |
ciscoEnvMonFanStatusDescr.201 | chassis-2 Chassis Fan Tray 1 |
ciscoEnvMonFanStatusDescr.202 | chassis-2 Power Supply 1 Fan |
ciscoEnvMonFanStatusDescr.203 | chassis-2 Power Supply 2 Fan |
ciscoEnvMonFanState.101 | normal(1) |
ciscoEnvMonFanState.102 | normal(1) |
ciscoEnvMonFanState.103 | normal(1) |
ciscoEnvMonFanState.201 | critical(3) |
ciscoEnvMonFanState.202 | normal(1) |
ciscoEnvMonFanState.203 | normal(1) |
Clearly shows it as critical??
02-04-2016 01:21 AM
This is the state of the chassis fan. It cannot be seen in the "sh env".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide