How to connect a single Router in vPC domain

[abdus_salam83]

Hi,

I have two Nexus 9300 series in one VPC domain and now I want to connect my MPLS router with this 2 switch and wants to run OSPF between two nexus switch and router. Can anyone help me for connectivity and configuration for this setup. 

[abdus_salam83]

Hi,

Also, I attached my network Diagram. Please check that and share the feedback. 

[abdus_salam83]

Please help Experts. 

[Tausif Gaddi]

Please refer mentioned link for design guidelines.

http://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-737536.html

[abdus_salam83]

Hi Tausif,

On my MPLS router i am not running MPLS protocol its simple BGP at the provider end of my WAN side and as LAN party we are running OSPF. Also, we are planning to do BGP to OSPF redistribution. For you better understanding I attached my new network diagram. 

[jkilleda]

Hello Abdus,

How to connect a single Router in vPC domain
You can refer to the link below for the configuration.

https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf