04-24-2024
09:22 AM
- last edited on
04-24-2024
09:35 AM
by
rupeshah
I accidentally bricked my Cisco C9300L switch and no longer has IOS or Bootstrap. Can I save copy of IOS and Bootstrap from my other Cisco C9300L switch and save to USB drive? Then copy images onto the switch that is inoperable?
04-24-2024 09:27 AM
yes if that is .bin file available on the switch.
plug the USB to other Switch copy the .bin file from the working switch.
Plug in to the switch do not have IOS XE and follow below steps to recover :
04-24-2024 06:05 PM
IF the switch is in ROMMON, it is not possible to copy the BIN fine into the flash.
The only options are to boot the firmware from the USB or to use the command "emergency-install usbflash0:filename.bin" to put the packages back into the switch.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide