cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1191
Views
0
Helpful
3
Replies
Beginner

How to enable WS-C4507R-E web management

Hi all,

Does anyone know how to enable WS-C4507R-E web management?

Usually I will download .Tar image which has html file on it and I will configure the ip http path to point to it. I will also configure ip http server, authentication local....etc and Thats it!

But as for C4507R-E, I can;t find .tar image file.

So how can I enable web management on a C4506???

Thanks in advance

Regards

Ryan

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Guru

Re: How to enable WS-C4507R-E web management

Ryan

As far as i know the 4500 like the 6500 doesn't support the same setup as the 3560/3750 switches ie. you don't get a .tar file which expands into a directory for the 4500/6500.

You can use Cisco Network Assistant to configure the 4500. You will need to download the software for this separately as it doesn't come bundled with the IOS. Attached is a link to configuring CNA for the 4500 -

http://www.ciscosystems.com/en/US/docs/switches/lan/catalyst4500/12.2/25ewa/configuration/guide/netasist.html

You can download Network Assistant, which is free, from this link (note this link is also at the start of the doc above)  -

CNA  

Jon

3 REPLIES
Highlighted
Beginner

Re: How to enable WS-C4507R-E web management

Hi All,

Anyone has any idea on how to enable and access C4507 web console??

Thanks

Regards

Ryan

Hall of Fame Guru

Re: How to enable WS-C4507R-E web management

Ryan

As far as i know the 4500 like the 6500 doesn't support the same setup as the 3560/3750 switches ie. you don't get a .tar file which expands into a directory for the 4500/6500.

You can use Cisco Network Assistant to configure the 4500. You will need to download the software for this separately as it doesn't come bundled with the IOS. Attached is a link to configuring CNA for the 4500 -

http://www.ciscosystems.com/en/US/docs/switches/lan/catalyst4500/12.2/25ewa/configuration/guide/netasist.html

You can download Network Assistant, which is free, from this link (note this link is also at the start of the doc above)  -

CNA  

Jon

Beginner

Re: How to enable WS-C4507R-E web management

Hi Jon,

You are absoutely correct!!! Thanks alot!! I just tried CNA yesterday... it worked fine.

Thanks very much!!!

Regards

Ryan Ho

CreatePlease to create content
Ask the Expert- MPLS troubleshooting