Hello folks,
I would much appreciate it if you could tell what does "u - unsuitable for bundling" stand for? How can I have it make appearance in my Lab?
I googled a lot but without any luck.
DLS2# show etherchannel summary
Flags: D - down P - bundled in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use f - failed to allocate aggregator
M - not in use, minimum links not met
u - unsuitable for bundling >>>>>>>>>>>>>>>>>>>>
w - waiting to be aggregated
d - default port
Number of channel-groups in use: 2
Number of aggregators: 2