cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Popup Hotspot Using ISR 1000 with WiFi/LTE for Teleworkers and Micro Branchesr
140
Views
0
Helpful
2
Replies
Highlighted

How to identify 3550/3560 support intervlan routing or not?

 

 

Is there any technique to identify 3550/3560 support intervlan routing or not?

2 REPLIES 2
Highlighted
Cisco Employee

It does support Intervlan

It does support Intervlan routing.

you can check the following guide:-

http://www.cisco.com/c/en/us/support/docs/lan-switching/inter-vlan-routing/41260-189.html

 

Else,

Login to the box and try to configure the ip routing command and then try to confiugre the SVI interfaces.

 

HTH

Regards

Inayath

**Please do not forget to rate the post if this info is helpfull.

 

Highlighted

Enable routing on the switch

Enable routing on the switch by using the “ip routing” command.

Even if IP routing was previously enabled, this step ensures that it is activated.

Switch(config)#ip routing

Note: If the switch does not accept the ip routing command, upgrade to either SMI image Cisco IOS Software Release12.1(11)EA1 or later, or an EMI image, and repeat this step. See the Pre requisites section for more information.

 

 

Check the "show run" command to Verify whether “ip routing” is enabled. The command, if enabled, appears towards the top of the output.

 

hostname Switch

!

!

ip subnet-zero

ip routing

!

 

Regards,

Khaleelur Rahman

CreatePlease to create content
Content for Community-Ad