11-17-2021 06:13 AM
how to make vlan communicate together like when ping ping from any vlan the other can replay i do that caz
i need to make my servers in vlan
and user in other vlan
user can go to internet but valn for server not and in the same time user can see my server
Solved! Go to Solution.
11-17-2021 06:44 AM
Hi,
you can use intern vlan routing for this. to do this, you need router or L3 Switch.
in l3 switch scenario>
1. create vlans for user and servers
2. create vlan interfaces in switch
in router+ switch scenario>
1. create VLANs for users and servers in switch
2. connect router to switch and make that port trunk in switch side
3. create sub interfaces in router for each VLAN
those are the ways you can enable inter-vlan routing.
check below link for more details
https://www.comparitech.com/net-admin/inter-vlan-routing-configuration/
11-17-2021 06:44 AM
Hi,
you can use intern vlan routing for this. to do this, you need router or L3 Switch.
in l3 switch scenario>
1. create vlans for user and servers
2. create vlan interfaces in switch
in router+ switch scenario>
1. create VLANs for users and servers in switch
2. connect router to switch and make that port trunk in switch side
3. create sub interfaces in router for each VLAN
those are the ways you can enable inter-vlan routing.
check below link for more details
https://www.comparitech.com/net-admin/inter-vlan-routing-configuration/
11-18-2021 06:28 AM
Dear
i have one SW layer 3 cisco 3750
so i need to commons to route between them
11-17-2021 01:28 PM
2 technologies described by K.B above are called intern vlan routing (must have L3 switch) and ROAS (Router on-a-stick) with L2 switch for vlans and router who is doing routing for vlans. ROAS can be setup 2-3 ways so I would seek doc (instructions/labs). also, you can find and watch samples of both on youtube. \
Regards, ML
**Please Rate All Helpful Responses **
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide