04-03-2022 06:45 PM
Hello there,
while configuring vty I have chose vty 0 4 then vty 5 15 then vty 5 6.
Here's what I got in my config file:
line vty 0
password 7 083540
no login
transport input ssh
line vty 1 4
password 7 082D4342
no login
transport input ssh
line vty 5 6
password 7 082D4342
no login
transport input ssh
line vty 7 15
no login
transport input ssh
How to delete vty? or how to merge them together?
Solved! Go to Solution.
04-03-2022 07:54 PM
@ThisIsLoai wrote:
while configuring vty I have chose vty 0 4 then vty 5 15 then vty 5 6.
conf t line vty 0 15 password YIPEE! end
04-03-2022 07:35 PM
Hi,
You can't delete the VTY lines.
HTH
04-03-2022 08:00 PM
I see
04-03-2022 07:54 PM
@ThisIsLoai wrote:
while configuring vty I have chose vty 0 4 then vty 5 15 then vty 5 6.
conf t line vty 0 15 password YIPEE! end
04-03-2022 07:59 PM
Thanks, Leo.
what's the explanation?
04-03-2022 08:12 PM
@ThisIsLoai wrote:
what's the explanation?
Explanation is simple: RTFM
I learnt that when I was studying CCNA. It is the first set of "instructions" in books, courses and CBT.
04-03-2022 08:25 PM
lol, I DO READ the TFM. it's not mentioned!
I'v took CCNA1 & i'm studying CCNA2 on netacad.com
I have not come across those kind of configurations.
04-03-2022 08:46 PM
@ThisIsLoai wrote:
it's not mentioned!
Oh geez! Seriously, they never mentioned this is netacad? WTF.
04-03-2022 09:01 PM
Yes they mentioned it (general concept n how to configure it) but not the point i asked !!
cuz i try to get hands-on i get confused sometimes n start to wonder n to ask more questions like hows ,ifs, and buts.
04-04-2022 08:47 AM
It's not a guarantee, but once you "know" a bit about how commands in an environment work, if something isn't directly documented, try doing what appears "logical" within that environment.
In this case, for example, you already should know you can configure VTY either using a specific line number or a range of line numbers. So, since you wanted to "merge" VTY lines 0 15, using a command using "VTY 0 15" might be part of "the trick", as also might (unsure it's supported for VTYs), something like "default VTY 0 15" before you further configure them.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide