11-21-2022 11:29 PM - last edited on 11-21-2022 11:33 PM by Jimena Saez
Hello
After a factory-reset all, my switch restarts in rommon (previously normal) but I'd like to restore a boot with the flash
I run via usbflash the image I copied .bin in flash:/
I would like to launch a flash:packages.conf boot but it does not exist...I can't see how to do it
and if I reboot I return to rommon mode
Thank you for your help!
11-21-2022 11:47 PM
flash:packages.conf - this works if the switch is installed in INSTALL Mode
if Bundle mode you booting with .bin file, then you need to setup boot variable.
If you like to covert BUNDLE to INSTALL :
install add file flash:IOXXE.bin activate commit
then you see packages.conf file - check show boot command see that is setup boot variable.
11-21-2022 11:18 PM
Bonjour
après un factory-reset all, mon switch redémarre en rommon (jusque là normal) mais j'aimerais remettre en place un boot avec la flash
je lance via usbflash l'image j'ai copié .bin dans flash:/
je voudrais lancer un boot flash:packages.conf mais ce dernier n'existe pas...je ne vois pas comment faire
et si je reboot je reviens en mode rommon
merci pour votre aide
11-21-2022 11:49 PM
flash:packages.conf : fonctionne si le commutateur est installé en mode INSTALL
si vous démarrez en mode Bundle avec un fichier .bin, vous devez configurer la variable de démarrage.
Si vous souhaitez convertir l'OFFRE GROUPÉE en INSTALLATION :
install add file flash:IOXXE.bin activate commit
ensuite, vous voyez le fichier packages.conf - vérifiez la commande show boot et voyez qu'il s'agit de la variable setup boot.
11-22-2022 12:15 AM
Merci, c'est parfait
11-22-2022 01:43 AM
@Translator a écrit :
Après une réinitialisation d'usine de tout, mon commutateur redémarre en rommon (auparavant normal) mais je voudrais restaurer un démarrage avec la mémoire flash
emergency-install usbflash0:IOS_filename.bin
11-22-2022 12:13 AM
Merci, c'est parfait
11-22-2022 01:42 AM
@Translator wrote:
After a factory-reset all, my switch restarts in rommon (previously normal) but I'd like to restore a boot with the flash
emergency-install usbflash0:IOS_filename.bin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide