Hi,
Did you try with "show route-map" only? You have to see a similar output like this:
c2921_internet#sh route-map
route-map INTERNET_INVITADOS, permit, sequence 10
Match clauses:
ip address (access-lists): 103
Set clauses:
ip next-hop 10.1.100.3
Policy routing matches: 2025356 packets, 206821491 bytes
route-map INTERNET_USUARIOS, permit, sequence 20
Match clauses:
ip address (access-lists): 102
Set clauses:
ip next-hop 192.168.99.11
Policy routing matches: 20253 packets, 206820 bytes
If it was useful please rate.
Regards.