07-26-2016
12:02 PM
- last edited on
03-25-2019
04:39 PM
by
ciscomoderator
Hi All,
Can anyone help me in upgrading IOS from Master Switch to Member Switch in catalyst switch 3750.
Thanks,
Praveen.
07-26-2016 12:43 PM
Hi,
If the member switch has enough room in its flash, you can copy from flash1 to flash2:
copy flash1 <ios> flash2
HTH
07-26-2016 12:44 PM
Hi;
You can copy the OS from Master switch to member switch.
Take a example your switch 1 is master then copy the IOS to member switch via below command:
copy flash1:/c3750-ipbasek9-mz.X.X.bin flash2:/c3750-ipbasek9-mz.X.X.bin
and so on all the member switches.
then verify the IOS is copied via dir flashX:
change the boot var: boot system switch all flash:<new_image>
save config and verify show bootvar & reload the switch.
Thanks & Best regards;
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide