11-04-2013 09:21 AM - edited 03-07-2019 04:24 PM
Hi I have two catalyst sw 4506 and I have set them in so redundate a sw I have already configured with vlans, and routes within my LAN, and that gives me an environment HSRP active - passive.
.
My 4506 has a 12-port Fo module and management module is enough with these modules or need any more?
I have to delete the configuration I have in production to implement HSRP.
How should this implementation of HSRP.
Thanks for your help
11-04-2013 09:31 AM
The number of modules needed depends on how many ports you need. Why do you need to delete configuration to implement HSRP? Not sure I understand you.
Daniel Dib
CCIE #37149
11-04-2013 10:10 AM
I 4506 1 has a configuration and production my 4506 2 has a copy of that configuration.
when you deploy that configuration running HSRP in 4506 1 is not lost?
I have 12 ports to connect to 12 edge sw 2600
11-05-2013 10:33 AM
Do you mean that they have identical configurations? The IP addresses must be unique at least. HSRP config can be the same but you need to set the priority to make the correct switch active.
Daniel Dib
CCIE #37149
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide