09-23-2014 09:23 PM - edited 03-07-2019 08:51 PM
One of the standby ip cannot ping or access
hsrp standby ip cannot ping
interface Vlan22
ip address 192.168.12.2 255.255.255.0
standby 0 ip 192.168.12.1
standby 0 priority 200
standby 0 preempt
end
interface Vlan22
ip address 192.168.12.3 255.255.255.0
standby 0 ip 192.168.12.1
standby 0 priority 50
standby 0 preempt
end
It was working suddenly stopped ;)
09-23-2014 09:38 PM
Okay,
Few things to check here as this was working fine and we dont know what software/hardware changes been made.
1-are you able to Ping the physical IP address of the other ourter?
I.e., to Ping 192.168.12.2 from Device 1?
And to Ping 192.168.12.1 from Device 2?
When you issue sh arp what do you see ==> Here you need to see virtual mac along iwth phycial map.
2- On your router, do you see the entries for the other router physical IP address?
And on R2, do you see the ARP entry for the virtual IP address?
3-
Whats the mac address of virtual Ip it should be 000.0C9f.Fxxxx >>> this should e the one.
4-
Run show standby on both the routes/switch to see the correct status.
5-
did you try failover? i.e Active to Standby if yes did that work?
6-
Is this only with this vlan or all the vlans are having the similar issue?
HTH
Inayath
10-17-2014 10:52 PM
Rebooted the switch then it worked
10-17-2014 10:59 PM
Quick way to solve the issue :-)
Mark the thread as solved please so that others with similar issue get benefited.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide