01-31-2007 09:19 AM - edited 03-05-2019 02:05 PM
I'm uploading a new image to a 3650 switch from c3560-ipbase-mz.122-25.SEB4 to c3560-ipbasek9-mz.122-25.EB4.bin image and now I can't brouse the switch but before the uplad I could...any sugestions?
01-31-2007 09:24 AM
I found the k9 image adds some different defaults to a few things, ip http server/secure-server to name a few.
Take a look at the running-config and look for a line spelling out http authentication, set it to what you want, confirm ACLs not killing you, or local auth when none is configured, and of course the IP general set up.
01-31-2007 09:35 AM
It's right out of the box..No ACL etc, See file.
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Switch
!
!
no aaa new-model
ip subnet-zero
!
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
!
interface FastEthernet0/1
!
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
!
interface Vlan1
ip address 192.192.192.1 255.255.255.0
!
ip classless
ip http server
ip http secure-server
!
!
control-plane
!
line con 0
line vty 0 4
no login
line vty 5 15
no login
!
!
end
Switch#
01-31-2007 09:33 AM
Did you get the tar file image , this has the needed html files , if you just downloaded the .bin file it probably won't work .
01-31-2007 09:36 AM
Ahh, No I didn't get that file..where can I?
01-31-2007 09:48 AM
Cisco Software center - http://www.cisco.com/public/sw-center/
But you'll need a CCO account.
01-31-2007 04:30 PM
will look like something like this c3560-ipservices-tar.122-25.SEB4.tar .You then hav to use the archive command I believe , not real familiar with this as we never use the HTML web based mgt. feature , CLI only.
02-01-2007 05:34 AM
Thanks for this info.. I'll see if I can find it..
02-01-2007 06:51 AM
Yes, I agree on the CLI however, Some of the team member perfer not to ust the Cash Line Interface.. I found the image file and noted once I get it c3560-advipservicesk9-mz.122-25.SEB4? It converts the tar file.. Is that where you mentioned "Archeive command" comes in?
Thanks
02-01-2007 07:06 AM
The archive command can extract an image directory tree and files from a .tar compressed image file and it can create a .tar compressed image file from a -drwx- image directory tree and files.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide