ā03-18-2023 05:01 PM
Hi, I just started working with Huawei switches and it is possible to make a switchport hybrid port and tag untagged frames. See the below Huawei commands.
port link-type hybrid = command to make a switchport hybrid in Huawei
port trunk pvid vlan x = command to tag untagged traffic coming in on the trunk in Huawei
Is there any Cisco switch or IOS that support hybrid mode like Huawei??
ā03-18-2023 05:20 PM
ā03-19-2023 07:19 PM
I just read private vlans and i dont think it is the same.
ā03-18-2023 05:38 PM
This hybrid is for VoIP?
If yes then cisco have same and more config for voice and data vlan in same swicthport
ā03-19-2023 07:20 PM
Hi, no it has nothing to do with voip. It is just the ability to make a switchport hybrid in Huawei switches and then be able to tag untagged traffic coming in on the trunk for example. I guess Cisco does not have such.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide