04-03-2013 07:43 AM - edited 03-07-2019 12:36 PM
i have a tack the siwtche and i cant put a route map in the interface vlan
can you help me please, i have this ios in my stack
1 26 WS-C3750-24P 12.2(55)SE3 C3750-IPBASEK9-M
2 26 WS-C3750-24P 12.2(55)SE3 C3750-IPBASEK9-M
3 28 WS-C3750G-24PS 12.2(55)SE3 C3750-IPBASEK9-M
4 28 WS-C3750G-24PS 12.2(55)SE3 C3750-IPBASEK9-M
5 54 WS-C3750X-48P 12.2(55)SE3 C3750E-IPBASEK9-M
an i try to put this configuration
interface Vlan181
ip address 192.168.181.2 255.255.255.0
ip policy route-map name
04-03-2013 07:55 AM
Hello
What sdm template are you using- i think you need the routing template to apply PBR
sh sdm prefer
conf t
sdm prefer routing
you will need to reload stack for this to take affect.
res
Paul
Please don't forget to rate any posts that have been helpful.
Thanks.
04-03-2013 08:07 AM
The current template is "desktop default" template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses: 6K
number of IPv4 IGMP groups + multicast routes: 1K
number of IPv4 unicast routes: 8K
number of directly-connected IPv4 hosts: 6K
number of indirect IPv4 routes: 2K
number of IPv4 policy based routing aces: 0
number of IPv4/MAC qos aces: 0.5K
number of IPv4/MAC security aces: 1K
04-03-2013 08:13 AM
Hello
So to apply policy based routing via route-map the sdm template needs to be "routing"
res
Paul
Please don't forget to rate any posts that have been helpful.
Thanks.
04-03-2013 09:46 PM
i do it this procedure but i have the same problem
04-03-2013 11:02 PM
Hi,
did you reload the switch for the new SDM template to take effect ?
Regards
Alain
Don't forget to rate helpful posts.
04-04-2013 01:09 AM
Hi Ricardo,
i think you have to run at least an IPSERVICE IOS to achieve this command. Your switches are all running IPBASE IOS.
Hope this helps.
Regards
04-04-2013 02:55 AM
Hi,
Good catch
Regards
Alain
Don't forget to rate helpful posts.
04-04-2013 07:21 AM
Thanks!!
just too simple for you!
Regards
Alessandro
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide