I'm looking for NX-OS commands applied to IOS.

[networknub]

hello.

I have now made the switch from IOS to nx-os.

The nx-os version is 9.3(7).

There are some security settings that I can't find.

ip http server

ip bootp server

service tcp-keepalives

no service tcp-small-servers

no service udp-small-servers

no service tftp

Do the above IOS commands have the same existence in NX-OS?

[MHM Cisco World]

https://netcraftsmen.com/ios-to-nx-os-converter-tool-from-cisco/

Check cisco tool

MHM

[networknub]

The tool seems to have too few supported versions and is not accurate...

[pieterh · Accepted solution]

>>> ip http server <<<
=> the nexus series does not have a web GUI built in it's NX-OS
reference: Does it exist web-UI about NX-OS? - Cisco Community

>>> ip bootp server <<<
Cisco Nexus 9000 Series switches do not support the relaying of bootp packets.
reference: Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 6.x - Configuring DHCP [Cisco Nexus 9000 Series Switches] - Cisco

>>> no service tftp <<<
Unfortunately, the Nexus 9K series does not support the TFTP Server feature;
reference: How to make N9K as a TFTP Server - Cisco Community