IE-2000U does not read full capacity of 1GB SD Card, only shows 134MB

[bwbaty]

I have an IE-2000U-4TS-G that is only showing 134MB of the Cisco 1GB SD Card.

Switch#dir
Directory of flash:/

No files in directory

134086656 bytes total (134078464 bytes free)

Switch#sh plat sdflash
SD Flash Manufacturer : SMART MODULAR (ID=27h)
Size : 972MB
Serial number : 6D326BA7
Revision : 3.0
Manufacturing date: 4/2017

I have done a format /recursive flash: and then performed an fsck

Switch#fsck
Fsck operation may take a while. Continue? [confirm]
mifs[10]: 0 files, 1 directories
mifs[10]: Total bytes : 134086656
mifs[10]: Bytes used : 8192
mifs[10]: Bytes available : 134078464
mifs[10]: mifs fsck took 0 seconds.

Fsck of flash: complete

Any assistance would be much appreciated.

[bwbaty]

I get the following:

Switch#fsck sdflash:
                   ^
% Invalid input detected at '^' marker.

It seems like it treats the SD Card like its flash and doesn't recognize sdflash: commands. I can't dir sdflash: or format sdflash:

[Leo Laohoo]

---

@bwbaty wrote:

mifs[10]: Invalid dir sctr=1
mifs[10]: directory[1] is corrupted! Attempting to restore it

---

Either the SD flash is dead or the SD slot is.
RMA the SD flash.  If the same error message occurs with the replacement SD card (and the same SD card works with every other unit), then RMA the switch.