12-03-2021 03:41 AM
Hello
I have a Catalyst 3650 switch without a ISO and i'm trying to insall one. But when i do it it says:
switch: copy xmodem:cat3k_caa-universalk9.16.03.05b.SPA.bin flash:cat3k_caa-universalk9.16.03.05b.SPA.bin
Begin the Xmodem or Xmodem-1K transfer now...
Cflash:cat3k_caa-universalk9.16.03.05b.SPA.bin: read only file system
Solved! Go to Solution.
12-03-2021 04:00 AM - edited 12-03-2021 04:02 AM
switch:flash_init
https://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/41845-192.html
or Emergency install :
is there any reason you going that version, stable 5 star gold is 16.12.5b
12-03-2021 04:00 AM - edited 12-03-2021 04:02 AM
switch:flash_init
https://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/41845-192.html
or Emergency install :
is there any reason you going that version, stable 5 star gold is 16.12.5b
12-03-2021 04:40 AM
The reason why im using this version is because i have the same working switch. So I just copied the version it had.
12-03-2021 04:46 AM
understand and thanks for the clarification, use one of the above mentioned option to restore the image back to switch.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide