12-11-2022 10:33 PM
i HAVE FOLLOWING SCENARIO
1. BRANCH 1
MPLS IP (192.168.20.1)
INTERNET IP (192.168.30.1)
2.
BRANCH 2
MPLS IP (192.168.20.2)
INTERNET IP (192.168.1.1)
3.
HUB
MPLS IP (192.168.20.3)
INTERNET IP (192.168.10.1)
MY QUESTION IS ALL RELATED TO BRANCH 1. ALL SOLUTION IS REQUIRED FOR BRANCH 1
ON BRANCH 1, I AM GETTING INTERNET ACCESS FROM HUB INTERNET WHEN ON MPLS.
WHEN MPLS ID DOWN I GET INTERNET ACCESS FROM BRANCH OWN INTERNET
HOW CAN I USE BRANCH 2 INTERNET ON BRANCH 1 ON BOTH MPLS AND INTERNET CONNECTIONS.
12-11-2022 11:39 PM
12-12-2022 12:18 AM - edited 12-12-2022 12:19 AM
Hello
Your topology doesn’t look correct, it suggests branch 1 connects to bracnh2 to reach the hub, I assume this is not correct, Also you don’t mention what dynamic routing (if any) you are currently using
I would say for your query so to use branch2 mpls/internet connection from branch 1 it could be possibly accomplished with a conditional policy route, but especially for mpls the return traffic could and most probably take a different path than branch 2<>branch1, however you don’t provide enough information on you current topology to suggest a definative solution.
12-12-2022 12:33 AM
Ok
My branch is connected to hub via mpls for main servers and gets internet from hub
my branch also has branch internet and connects to hub with ipsec tunnel for main servers and gets internet access from branch internet and hub servers via ipsec tunnel when mpls is not working.
Now branch 2 is also like hub and branch 1 connects to branch 2 servers via ipsec tunnel but does not get its internet
i need to get branch 1 access to branch 2 internet .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide