ā12-30-2016 10:16 PM - edited ā03-08-2019 08:45 AM
i have two broad band connections both ISP are BSNL 20mbps & 50mbps but we have allocated 20mbps for directors only for 4 members but i always get internet slow down issue please help me
network configuration........
we have 1 ISP with two different connections one is BSNL 20Mbps & 50Mbps where both are connected to single fortigate firewall 60D; from that firewall we have given one uplink to switch1 where switch1 has more than 40 device connected along with 3 printers and 2 biometric devices and then from switch1 we have given uplink to switch2 where switch2 has connected to main server, 35 systems and also we have created 2 VLAN from switch2
this is how we have configured our network
ā12-31-2016 12:32 AM
Hello,
MTU size could be the culprit...
Can you post the config(s) of your device(s) ?
ā12-31-2016 01:48 AM
sure...!
network configuration........
we have 1 ISP with two different connections one is BSNL 20Mbps & 50Mbps where both are connected to single fortigate firewall 60D; from that firewall we have given one uplink to switch1 where switch1 has more than 40 device connected along with 3 printers and 2 biometric devices and then from switch1 we have given uplink to switch2 where switch2 has connected to main server, 35 systems and also we have created 2 VLAN from switch2
this is how we have configured our network
ā12-31-2016 04:22 AM
Hello,
what I meant was the running configurations of your devices. If you do a 'show run', that is what is needed...can you post that ?
ā12-31-2016 02:06 AM
please resolve this as fast as possible
as i'm new joinee in this company i'm finding difficult to handle
ā01-22-2017 11:08 PM
Config(s) of your device(s) through "show run" Command will be required to see what is actually happening.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide