Wow, this has become slightly complicated due to 2 posters trying to resolve different issues.
1) Dante - can you post your query as a new thread and we need a bit more than "i am having the same problem, please help"
So can you post -
1) config of 3560 switch
2) if some of the clients are another switch which it sounds like they are then please describe how it is connected to the 3560 ie. a trunk, an access link.
3) post config of other switch
4) When you say they cannot communicate can you -
i) tell us what you are using to try and communicate eg. ping ?
ii) the device you are pinging from - if a PC can you provide IP address details ie. IP/subnet mask/default-gateway
iii) the device you are pinging to - same info as ii)
that should give us enough to get started.
2) Faizan, similiar set of questions for you ie. you say you cannot ping but you don't tell us from where to where ?
So you have posted the 6500 relevant config. Can you post -
i) "sh ip int brief | inc Vlan" from the 6500
ii) tell us which device you are pinging from and provide IP/subnet mask/default-gateway
iii) tell us which device you are pinging to and provide same as ii) above
iv) the access-switches which the devices in ii) & iii) are connected to - can you provide from these access switches
a) "sh in trunk"
b) "sh vlan brief"
Jon
