07-27-2011 03:54 AM - edited 03-07-2019 01:25 AM
Yesterday Cisco released IOS 15 code into the wild for the 2960 and 3560/3750 families but the link to the release notes is not working. Because I already have a whole bunch of 4500/Sup7's running IOS 15 I am thinking about taking the plunge with 30 3750-X's I have on order but want to review the release notes first. Does anybody know where they might be hiding?
Thanks
07-27-2011 06:06 AM
07-27-2011 06:32 AM
Hi Nathan,
Please find the below link for release notes..
http://www.cisco.com/en/US/docs/ios/15_0/release/notes/150MREQS.html
And below is for general A& Q
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps8802/ps10587/ps10591/ps10621/qa_c67_561940.html
Please rate the helpfull posts.
Regards,
Naidu.
07-12-2012 04:48 PM
Not all Catalyst 3750 and 3560 switches can run this release. These models are
not supported in Cisco IOS Release 12.2(58)SE1 and later: WS-C3560-24TS, WS-C3560-24PS. WS-C3560-48PS, WS-C3560-48TS, WS-C3750-24PS, WS-C3750-24TS, WS-C3750-48PS, WS-C3750-48TS, WS-3750G-24T, WS-C3750G-12S, WS-C3750G-24TS, WS-C3750G-16TD. For ongoing maintenance rebuilds for these models, use Cisco IOS Release 12.2(55)SE and later (SE1, SE2, and so on). Not all Catalyst 3750 and 3560 switches can run this release. These models are not supported in Cisco IOS Release 12.2(58)SE1 and later: WS-C3560-24TS, WS-C3560-24PS. WS-C3560-48PS, WS-C3560-48TS, WS-C3750-24PS, WS-C3750-24TS, WS-C3750-48PS, WS-C3750-48TS, WS-3750G-24T, WS-C3750G-12S, WS-C3750G-24TS, WS-C3750G-16TD. For ongoing maintenance rebuilds for these models, use Cisco IOS Release 12.2(55)SE and later (SE1, SE2, and so on).
Does this mean WS-C3560, WS-C3750 are not going to get IOS 15? Only the enhanced versions -X, -G, -E will get IOS 15?
07-13-2012 08:33 PM
Does this mean WS-C3560, WS-C3750 are not going to get IOS 15? Only the enhanced versions -X, -G, -E will get IOS 15?
Yes and No. Let me explain:
The first generation of 3560 and 3750 came with just 16 Mb of flash. Unfortunately, IOS versions 12.2(58)SEx and 15.0(1)SEx requires a minimum of 24 Mb flash.
So, unless your appliance has 24 Mb flash, the highest IOS you can load into them is 12.2(55)SEx.
11-02-2015 07:20 AM
Hello,
sorry for asking here but I have 3 days searching on the internet I have a ML switch for lab enviorment and need to upgrade since the exams now operate on IOS 15.
My cisco model is: WS-C3560-24TS and my memory 32514048 bytes total (22032384 bytes free), 32MB. the cisco online site doesnt allow the version IOS 15.
Thanks
11-02-2015 09:18 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Believe that model is end-of-life, and it may have gone EoL before 15.x, which could explain why you don't see any 15.x code for it.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: