09-11-2012 10:57 PM - edited 03-07-2019 08:50 AM
Hello
I have a pair of 6509-E Switches running VS-720 Supervisors. We are planning to add Ace Module onto the 6509-E.
Will IP Base Image suffice the requirement? Will Ace Module work with only IP Base Image?
regards
Rahul Jauhari
09-12-2012 12:03 AM
Hi Rahul,
Yes, IP Base image will support for the ACE module. Please see the minimum required image to support for ACE module below,
Service Module:
Application Control Engine (ACE10 and ACE20)
(ACE10-6500-K9 and ACE20-MOD-K9)
Minimum Cisco IOS Release:
12.2(33)SXI
Minimum Module Release:
A2(1.3)
Refer the below docs,
http://www.cisco.com/en/US/products/ps9336/products_tech_note09186a0080a7c72b.shtml
http://www.cisco.com/en/US/products/ps9336/products_tech_note09186a0080a7c837.shtml
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/release/notes/features.html
Regards,
Aru
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: