iOS upgrade for WS-C4948-10GE ipbase to enterprise
I am trying to upgrade my WS-C4948-10GE from ipbase (cat4500-ipbase-mz.122-46.SG.bin) to enterprise (cat4500-entservicesk9-mz.122-54.SG1.bin) so that I can run some BGP routing. I pulled the code from Cisco, tftp'd to the switch ensured the conf-reg is correct (0x2102) and set the boot system flash command to point to the enterprise code.
on reboot the switch tries to load the new code but gets stuck at:
Custom mobile apps are growing in demand; according to mobile app design services, some 75-80% of business owners are showing interest in having a mobile app for their business. Although, they help to improve the statistics of the business partially, thei...
(Pdf copy at the bottom)
Segmentation within SD-Access is enabled through the combined use of both Virtual Networks (VN), which are analogous to VRFs, and Cisco Scalable Group Tags (SGTs). VNs, like VRFs, provide comp...
The 2020 IT Blog Awards, hosted by Cisco, is now open for submissions through October 16. Submit your blog, vlog or podcast today. For more information, including category details, the process, past winners and FAQs, check out: https://www.cisco...
Hello,We have a pair of N3K-3064PQ-10GX and one of them acting as backup and we want to migrate from VyOS to it, we want to add 500x interface vlan and each interface vlan has its own ip/prefixes (for example /30 /29 ...) and we ahve 6-8x BGP session with...
We live in an age that is both thrilling and evolving substantially. A new trend/technology is always on rise even before the preceding has been used to its fullest potential. Although the concepts of digital transformation may seem over discussed, ...