09-21-2018 01:55 AM - edited 03-08-2019 04:12 PM
We have situation that some users unable to get dynamic ip connected on 3750G, IOS is 15.0 SE9. The dhcp server is reachable and ip scope is not full on dhcp server. Just wonder if any bug on 3750 cause the ip assignment issue and how to fix it
09-21-2018 02:34 AM
Hi, is the 3750 used as a switch only?
Is the client in the same vlan of dhcp server?
Or, are the server and the clients in different vlans? is the 3750 used as a router between vlan?
In this last case do you use "ip dhcp helper address" under interface vlan?
Dhcp requests are sent in broadcast. If you have vlans you need to use ip helped address.
Let us know your notes.
Regards.
09-21-2018 02:53 AM
09-21-2018 03:14 AM
Do you have 'ip helper address' configured on the interface used as a gateway for the clients?
Regards.
09-21-2018 03:31 AM
09-21-2018 03:56 AM
Hello Peter,
If you do a ping to the sever and source it from the SVI ip, the server knows how to get back to that subnet?
ping [server ip] source vlan [user vlan]
Was this ever working or new deployment? If you do a wireshark capture on the client, do you see any response from the server?
Hope that helps!
09-21-2018 04:43 AM
Is "spanning-tree portfast" enabled on the ports?
09-21-2018 05:21 AM
Hello
As you most of your clients are receiving dhcp allocation can you confirm that the dhcp scope is large enfogh to accommodate all your users?
Also are these failed users wired/wireless or both and is this failure occurring on either?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide