I have Cisco Catalist 4503 Switch with following confurations:-
System image file is "bootflash:cat4500-ipbase-mz.122-50.SG3.bin"
cat4500-ipbase-mz.122-54.SG.bin.
cisco WS-C4503 (MPC8245) processor (revision 10) with 262144K bytes of memory.
Processor board ID FOX09260211
MPC8245 CPU at 266Mhz, Supervisor II+
Last reset from PowerUp
1 Virtual Ethernet interface
48 FastEthernet interfaces
2 Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Can be implemented Route map policy in this model and IOS of the Switch, Please suggest how can i proceed with the same !!!!!
