cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
623
Views
0
Helpful
1
Replies
Beginner

IPC log on Cisco 2811

Hi,

I am Ashley and i got 2 routers 2811 running  on HSRP on the LAN. On the active HSRP router, I am getting the following logs continuously:

Nov  6 14:24:44.439: %IPC-5-REGPORTFAIL: Registering Control Port Id=0x3 timeout=0x6 -Process= "IPC register control port", ipl= 0, pid= 127,  -Traceback= 0z

Nov  6 14:25:15.159: %IPC-5-REGPORTFAIL: Registering Control Port Id=0x3 timeout=0x6 -Process= "IPC register control port", ipl= 0, pid= 127,  -Traceback= 0z

Nov  6 14:25:45.880: %IPC-5-REGPORTFAIL: Registering Control Port Id=0x3 timeout=0x6 -Process= "IPC register control port", ipl= 0, pid= 127,  -Traceback= 0z

Nov  6 14:26:16.601: %IPC-5-REGPORTFAIL: Registering Control Port Id=0x3 timeout=0x6 -Process= "IPC register control port", ipl= 0, pid= 127,  -Traceback= 0z

Nov  6 14:26:47.322: %IPC-5-REGPORTFAIL: Registering Control Port Id=0x3 timeout=0x6 -Process= "IPC register control port", ipl= 0, pid= 127,  -Traceback= 0z

Nov  6 14:27:18.050: %IPC-5-REGPORTFAIL: Registering Control Port Id=0x3 timeout=0x6 -Process= "IPC register control port", ipl= 0, pid= 127,  -Traceback= 0z

Nov  6 14:27:48.771: %IPC-5-REGPORTFAIL: Registering Control Port Id=0x3 timeout=0x6 -Process= "IPC register control port", ipl= 0, pid= 127,  -Traceback= 0z

Nov  6 14:28:19.492: %IPC-5-REGPORTFAIL: Registering Control Port Id=0x3 timeout=0x6 -Process= "IPC register control port", ipl= 0, pid= 127,  -Traceback= 0z

Nov  6 14:28:50.213: %IPC-5-REGPORTFAIL: Registering Control Port Id=0x3 timeout=0x6 -Process= "IPC register control port", ipl= 0, pid= 127,  -Traceback= 0z

Nov  6 14:29:20.937: %IPC-5-REGPORTFAIL: Registering Control Port Id=0x3 timeout=0x6 -Process= "IPC register control port", ipl= 0, pid= 127,  -Traceback= 0z

 

The IOS version is

c2800nm-advipservicesk9-mz.124-24.T1.bin

and cpu and memory are normal. Operation on the router is normal.

However, I wanted to know what are causing these logs, software or hardware related.

Thanks,

Ashley

Everyone's tags (4)
1 REPLY 1
Highlighted
Cisco Employee

IPC log on Cisco 2811

Hi Ahsley,

It looks like the following DDTS is the root cause:

     CSCsy66239    %IPC-5-REGPORTFAIL: Registering Control Port Id=0x3 timeout=0x6

Symptom:

     the following message every 30 seconds:

      %IPC-5-REGPORTFAIL: Registering Control Port Id=0x3 timeout=0x6 -Process= "IPC register control port", ipl= 0, pid= 317,  -Traceback= 0x601995ECz 0x601997A4z 0x6327D464z 0x6327D448z

Workaround:

None.

Kind Regards,
Ivan Shirshin

**Please grade this post if you find it useful.

Kind Regards, Ivan Shirshin **Please grade this post if you find it useful.
CreatePlease to create content
Content for Community-Ad