10-30-2013 07:45 AM - edited 03-07-2019 04:19 PM
Are static NAT the only way for allowing access to DVR/Server?
I have around 8 DVRs/Servers all in different networks, so 16 command lines for static NAT both ways.
Example:
For 1 DVR access-
ip nat inside source static 10.10.x.x 50.x.x.x
ip nat outside source static 50.x.x.x 10.10.x.x
Please let me know if there is a easier way to do it. The problem is I cant do dynamic as they all are in different locations (networks).
Solved! Go to Solution.
10-30-2013 10:19 AM
Are you wanting access from the outside of the network? If so, you only need the "ip nat inside" line.
HTH,
John
*** Please rate all useful posts ***
10-30-2013 10:19 AM
Are you wanting access from the outside of the network? If so, you only need the "ip nat inside" line.
HTH,
John
*** Please rate all useful posts ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide