I have a 6509-V-E with VS-SUP2T-10G, IOS version s2t54-advipservicesk9-mz.SPA.150-1.SY7a.
As per datasheet of WS-X6904-40G: http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6500-series-switches/data_sheet_c78-696623.html
Port Group 1& 2 has combined Ingress packet buffer of 10 MB same as the Port Group 3 & 4
Port Group 1 & 2 has combined Egress packet buffer of 176 MB same as Port Group 3 & 4
I wonder if there is a specific show command to see those buffer sizes. I've been searching for a while. Appreciate if anyone can provide some hints.
Hi Iulian Vaideanu,
I don't have access to device right now, but I remember it shows buffer size in per-module based, not per port-group based.
I only have access to X67xx cards (where indeed it shows buffer size per module) and C6800 cards (where the values are per port) - I was curious about X69xx myself...