iSCSI on SG200

[eleach]

Hello,

I have a Dell EqualLogic PS4210 storage array and a Dell R730 server attached to a Cisco SG200 50 port smart switch.  Using vsphere vcenter I configured the host and the ports on the array, but I can't seem to get the ports on the switch configured for iSCSI traffic.  Does anyone know if the SG200 supports iSCSI and if so, how to configure it?  Your help will be deeply appreciated!

Thank you!

[mattjones03]

Hi,

While all devices are in VLAN 3, are you able to ping the group IP of the Dell EqualLogic from a workstation also sitting in VLAN 3?

Within vCentre have you defined a VLAN on the port group? This will not be required if you have.

[eleach]

Hi matt,

I can ping all the IP addresses and I created a vlan group on vswitch1