cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
302
Views
0
Helpful
2
Replies
Highlighted
Beginner

ISR 4331 - SM-X-ES3-24-P issue

Hi All,

 

I have just purchased a ISR4331/K9 with a SM-X-ES3-24-P.

 

I am getting the below error message:

*May 22 13:45:55.331: %SPA_OIR-3-EVENT_TIMEOUT: subslot 1/0: Timeout waiting for SPA OIR event
-Traceback= 1#00996a21ae914aca4b637c04ca379136 :7F8EEDD43000+C268B03 :7F8EEDD43000+C2401F0 :7F8EEDD43000+9B2E977 :7F8EEDD43000+C23D452 :7F8EEDD43000+B5B91C9
*May 22 13:46:00.334: %SPA_OIR-3-RECOVERY_RELOAD: subslot 1/0: Attempting recovery by reloading SPA
*May 22 13:46:00.334: %SPA_OIR-6-OFFLINECARD: SPA (SM-X-ES3-24-P) offline in subslot 1/0
*May 22 13:52:05.350: %SPA_OIR-3-EVENT_TIMEOUT: subslot 1/0: Timeout waiting for SPA OIR event
-Traceback= 1#00996a21ae914aca4b637c04ca379136 :7F8EEDD43000+C268B03 :7F8EEDD43000+C2401F0 :7F8EEDD43000+9B2E977 :7F8EEDD43000+C23D452 :7F8EEDD43000+B5B91C9
*May 22 13:52:10.353: %SPA_OIR-3-RECOVERY_RELOAD: subslot 1/0: Attempting recovery by reloading SPA
*May 22 13:52:10.353: %SPA_OIR-6-OFFLINECARD: SPA (SM-X-ES3-24-P) offline in subslot 1/0

 

Does anyone have an idea of why this might be happening ? I've attached a couple of command outputs as well.

2 REPLIES 2
Hall of Fame Expert

Re: ISR 4331 - SM-X-ES3-24-P issue

Hello Tom,

try the following:

power off the router, remove and reinsert the service module

power on again.

the service module looks like to be stucked and it is not able to answer to Pnp messages

see log messages from show tech

[05/22/19 12:55:45.251 UTC 21 437] pnp_pxc_xmt_loop: String hello = OP1137:PID:ISR4331/K9,VID:V04,SN:FDO2033A0K1OP1210:ISR4331/K9OP133:1.0OP145:64915OP157:0.0.0.0
[05/22/19 12:55:45.251 UTC 22 437] pnp_pxc_xmt_loop: sendto returns 94
[05/22/19 12:55:45.251 UTC 23 437] pnp_pxc_xmt_loop: PROXY CLIENT: sent data = OP1137:PID:ISR4331/K9,VID:V04,SN:FDO2033A0K1OP1210:ISR4331/K9OP133:1.0OP145:64915OP157:0.0.0.0
[05/22/19 12:56:45.251 UTC 24 437] pnp_pxc_rcv_cleanup: setting FAIL discovery

 

Hope to help

Giuseppe

 

Beginner

Re: ISR 4331 - SM-X-ES3-24-P issue

Thank you for your help; unfortunately, I am still gettting the same issue - I have even replaced the switch module and am having the same issue. Do you think it could be an IOS issue ?
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards