Hi everyone
Switch cisco c9200l config mode stack after i power off switch and boot again.
but switch reading file packeges.conf i see "Chassis 1 reloading, reason - Active/standby selection failed in 1+1 Mode" and reboot alwyas.
=====================================================================================
Initializing Hardware...
System Bootstrap, Version 17.9.1r [FC8], RELEASE SOFTWARE (P)
Compiled Wed 07/13/2022 19:01:21 by rel
Current ROMMON image : Primary
C9200L-48T-4G platform with 2097152 Kbytes of main memory
boot: attempting to boot from [flash:packages.conf]
boot: reading file packages.conf
##############
Both links down, not waiting for other switches
Switch number is 1
Chassis 1 reloading, reason - Active/standby selection failed in 1+1 Mode
Sep 13 04:30:32.935: %PMAN-5-EXITACTION: C0/0: pvp: Process manager is exiting: reload cc action requested
Sep 13 04:30:33.512: %PMAN-5-EXITACTION: F0/0: pvp: Process manager is exiting: reload fp action requested
Sep
Initializing Hardware...
System Bootstrap, Version 17.9.1r [FC8], RELEASE SOFTWARE (P)
Compiled Wed 07/13/2022 19:01:21 by rel
Current ROMMON image : Primary
C9200L-48T-4G platform with 2097152 Kbytes of main memory
boot: attempting to boot from [flash:packages.conf]
boot: reading file packages.conf
##############
Both links down, not waiting for other switches
Switch number is 1
Chassis 1 reloading, reason - Active/standby selection failed in 1+1 Mode
Sep 13 04:33:23.552: %PMAN-5-EXITACTION: C0/0: pvp: Process manager is exiting: reload cc action requested
Sep 13 04:33:24.092: %PMAN-5-EXITACTION: F0/0: pvp: Process manager is exiting: reload fp action requested
Sep 1
