L2 switch trunking unable to interconnect VLAN

[MarquezHB00]

Hello,

I have created different VLANs and used trunk on L2 switches to have them communicate with each other. There is a L3 switch which acts as the default gateway for the VLAN using SVI's. 

I am unable to ping VLAN 4 & 5 default-gateway 192.168.4.1 & 192.168.5.1 from PC1 & PC3. 

Running simulation mode I can see that the packets created by those PCs will not add a MAC address to the destination address in the packet. 

Please have a look at the copy of my file attached.

PS. I have created the exact same model on the right side of this project using Packet Tracer and it works fine. 

Thanks 

[Martin L · Accepted solution]

SVI interfaces 4 and 5 are down (show ip interface brief);  this is because corresponding vlans are missing in switch database.

Regards, ML
**Please Rate All Helpful Responses **