03-31-2011 08:49 AM - edited 03-06-2019 04:22 PM
Hello,
we have build up a Port-Channel to a Checkpoint Firewall, which is running a new software, which allows this the first time.
Before it was not possible.
Now we have two Cisco 6500 Series Switche form where each Port-Channel was built to two Checkpoint maschines.
One Port-Channel worked, one not.
We found out, that we need at minimum the IOS installed: 12.2(33 SXI3 to run LACP successfully with Checkpoint.
Is this known, that IOS version has an influence on LACP?
Or was there a bug?
Solved! Go to Solution.
03-31-2011 04:43 PM
Hi Richi,
LACP has been supported in earlier versions of SXI releases like SXI1, SXI2, etc...
HTH
Reza
03-31-2011 04:43 PM
Hi Richi,
LACP has been supported in earlier versions of SXI releases like SXI1, SXI2, etc...
HTH
Reza
04-04-2011 12:28 AM
Hello,
before we had the IOS s72033-adventerprisek9_wan-mz.122-18.SXF11.bin active.
Looks like this.
Thanks!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: