Licensing infrastructure is NOT initialized CAT6500

[Salvador Antonio Quintanilla Mendoza]

Hi!,

    After a reload Im having this error messages on my Cat6500, the error is "Licensing infrastructure is NOT initialized"  but as i know, we dont need any licence...

RSWELSCEFCORB#show licence 
Error: Licensing infrastructure is NOT initialized.
Error: Licensing infrastructure is NOT initialized.
                     ^
% Invalid input detected at '^' marker.

RSWELSCEFCORB#show Error: Licensing infrastructure is NOT initialized.
Error: Licensing infrastructure is NOT initialized.

RSWELSCEFCORB#   

COREB#show ver
Error: Licensing infrastructure is NOT initialized.
Error: Licensing infrastructure is NOT initialized.
Cisco IOS Software, s2t54 Software (s2t54-IPSERVICESK9-M), Version 15.1(2)SY4a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Mon 22-Dec-14 12:24 by prod_rel_team

ROM: System Bootstrap, Version 12.2(50r)SYS3, RELEASE SOFTWARE (fc1)

 RSWELSCEFCORB uptime is 8 hours, 27 minutes
Uptime for this control processor is 8 hours, 28 minutes
System returned to ROM by power on
System restarted at 01:40:09 ELS Mon Aug 10 2015
System image file is "bootdisk:s2t54-ipservicesk9-mz.SPA.151-2.SY4a.bin"
Last reload reason: Unknown reason

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.
          
cisco WS-C6509-E (M8572) processor (revision ) with 1785856K/262144K bytes of memory.
Processor board ID SMG1408N0C2
 CPU: MPC8572_E, Version: 2.2, (0x80E80022)
 CORE: E500, Version: 3.0, (0x80210030)
 CPU:1500MHz, CCB:600MHz, DDR:600MHz
 L1:    D-cache 32 kB enabled
        I-cache 32 kB enabled

Last reset from power-on
24 Virtual Ethernet interfaces
315 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
2543K bytes of non-volatile configuration memory.

Configuration register is 0x0 (will be 0x2102 at next reload)

COREB#

[ROGER GROSSER]

I am having this same problem.   Is anyone aware of the fix?

Switch 6509#show tech
Error: Licensing infrastructure is NOT initialized.
Error: Licensing infrastructure is NOT initialized.

------------------ show clock ------------------

11:35:22.487 UTC Fri Jan 29 2016

------------------ show version ------------------

Error: Licensing infrastructure is NOT initialized.
Error: Licensing infrastructure is NOT initialized.
Cisco IOS Software, s2t54 Software (s2t54-ADVIPSERVICESK9-M), Version 15.1(2)SY6, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, IFnc.
Compiled Thu 10-Sep-15 01:36 by prod_rel_team

ROM: System Bootstrap, Version 12.2(50r)SYS3, RELEASE SOFTWARE (fc1)

 USNYCSPE-CORE01 uptime is 11 weeks, 5 days, 21 hours, 19 minutes
Uptime for this control processor is 9 weeks, 2 days, 15 hours, 43 minutes
System returned to ROM by Stateful Switchover
System restarted at 19:51:33 UTC Tue Nov 24 2015
System image file is "bootdisk:s2t54-advipservicesk9-mz.SPA.151-2.SY6.bin"
Last reload reason: Unknown reason

Thanks. 

[Salvador Antonio Quintanilla Mendoza]

Hi!,

I Opened a TAC ticket and this was the solution.

in some cases next messages appear after an upgrade of the SUP. The reported message appears immediately after you login to the device or execute a command.

RSWELSCEFCORB#show tech-support
Error: Licensing infrastructure is NOT initialized.
Error: Licensing infrastructure is NOT initialized.

------------------ show license udi ------------------

Error: Licensing infrastructure is NOT initialized.
Error: Licensing infrastructure is NOT initialized.

------------------ show license udi standby ------------------

Error: Licensing infrastructure is NOT initialized.
Error: Licensing infrastructure is NOT initialized.

------------------ show license feature ------------------

Error: Licensing infrastructure is NOT initialized.
Error: Licensing infrastructure is NOT initialized.

The problem could be a transient issue within the NVRAM, so please execute next AP in a MW to get rid of the messages.

1) Back up all the information in NVRAM and copy to a safe place, like bootflash.

1a ) To see the content of the NVRAM please issue next command.

startup-config

2a) Copy the contents of the NVRAM to Bootflash or sup-bootflash:

copy nvram:/<file name> sup-bootflash:<name of the file>

2 ) Execute next command in Privileged EXEC Mode in order to erase NVRAM content.

"erase /all nvram:"

3) Save running to startup config.

"write" or "copy run start"

4) After step 2 is done, perform a Reload of the device.

[pradeshi]

We were getting below error:

CSG-H12007#sh licen

Error: Licensing infrastructure is NOT initialized.

Error: Licensing infrastructure is NOT initialized.

After applying “clear platform license-partition” command and giving reload to the router issue got resolved.

[voc_cai_cts3@orange.com]

Faced the same issue and it was resolved by TAC after issuing command   fsck lic0:  then reload